Victron Bluetooth Pairing Code
If your Victron Bluetooth device asks you for a pairing code the default is 000000.
Afterwards you can set up your own code to prevent unauthorized access
Related Articles
Troubleshooting Victron Connect Bluetooth
Here are some troubleshooting tips if you are having difficulty connecting to your solar charge controller. 1. The controller must be powered up and connected to a battery. There should be some indication of life such as a flashing light 2. The ...
Victron Warranty Procedure
Victron Energy Warranty Procedure Victron Energy offers a five year warranty for most items that they sell, the only exception is batteries where the warranty is two years for conventional batteries and three years for lithium batteries. Victron ...
New Victron Smart Lithium Battery
The latest Victron battery in the store is the following: BAT512120610 LiFePO4 Battery 12,8V/200Ah Smart These are about half the weight of the current model and clock in at 20.5 kg versus the 43 kg of the previous model. Here they are on the spec ...
Suite of Victron parts for Lithium batteries on a boat
The full suite of Victron parts would include the following: Batteries VE Bus BMS - the battery management system BMV 712 battery monitor MultiPlus inverter charger Remote for MultiPlus The Color Control GX (CCGX) is optional, it doesnt do anything, ...
What is the load output used for on certain Victron MPPT charge controllers
What is the load output used for on certain Victron MPPT charge controllers Posted by Peter Kennedy on 4/4/2018 to Solar A typical use for the load output is for a well pump. The well pump will run from the battery as long as the battery is ...